Posts Tagged ‘Influence’
The influence of lubricant on the life gear of the wheels of cars
To our knowledge, the team plays an important role for the transmission car. Thus the life of the gearbox has a direct impact on the efficiency of cars. During the transfer of the car, the role of the lubricant can not be ignored. The quality of the lubricant determines the length of the devices. The following article will discuss the influence of the lubricant on the life of the car art. What comes first is the choice of lubricant. There are two rules for the election, that is, the speed and the transfer status. The path to the gear of the transfer is the type of transmission. In this mode of transmission, the choice of lubricant for the rotation speed of the march off. If the speed is less than 12 m / s, is that large plants are immersed in the oil sump. And if the drive wheels, which provide the lubricant to the transmission range. when the speed of 12m / s, if there is enough oil in the area and there are a lot of oil in the gearbox oil is discarded and can not in the field of networking.
Consequently, the lubrication for an error and the life of the device can be reduced. In short, when people add oil to the gears, they must follow the above conditions. Or the life of car accessories use to be reduced. If there is not enough lubrication, but his way is not appropriate, but also have a negative impact on the lives of the wagon. The types of lubricant can be determined by the terms of the transfer. For example, if the train is the bias used, the lubricant is the same as that used computer gear.
Then the life of the car has a close relationship with the aging of the lubricant. If the lubricant is used for a long time, older people. To some extent, reduce the period of use and efficiency of the plants. The journey continues, along with some agents, there are some foreign policy issues and thus the function of these additives are becoming weaker.
The team is in error. Therefore, people should check that the lubricant is in a state of aging. How do people identify the lubricant is aging? A good way is to check the carbon particles on the surface of the march. If not all the carbon particles, can be judged that the particles must enter the lubricant and allow the oil loses its lubricating properties. To extend the useful life of equipment, the lubricant must be replaced immediately.